| 1. | Structural shape and dimension for forging die
辊锻模结构型式及尺寸 |
| 2. | General specifications for roll forging die
辊锻模.通用技术条件 |
| 3. | Terminology of forging dies and elements
锻模及其零件术语 |
| 4. | Forging die steel
锻造模用钢 |
| 5. | Split forging die
拼合锻模 |
| 6. | Solid forging die
整体锻模 |
| 7. | To improve and stabilize the service life of hot - forging die fabricated by cast die steer , the failure modes and mechanism were analyzed
摘要为了稳定和提高精铸热锻的使用寿命，研究了其失效形式和机理。 |
| 8. | Improper material composition and processing can cause earlier fracture failure and short life happened to the hot - forging dies
不恰当的材质及工艺导致热锻模具出现早期断裂失效，失效形式不合理，寿命较低。 |
| 9. | Forging die is the most suitable for high speed milling application , because of its high hardness i material and lower surface roughness
而各式模具中又以?模最为适合，因其模具材料硬度较高且模穴表面粗度要求较低。 |
| 10. | Abstract : in the paper , the hot crack for the forging die made by methodsof squeeze casting is analyzed , how to reduce the hot crack is also given out
文摘:从生产实际出发，分析了锻模液态模锻成形过程中热裂纹形成的主要原因，提出了降低锻模热裂纹的几点措施。 |
